How to configure WPA2 on Windows XP
In order to connect to K-State Salina's secure wireless network with a Windows operating system you will need to install the SecureW2 supplicant. To do so:
Download and run the SecureW2 Installer for Windows. (eID and password required)
Use the default options listed on the installation screens.
After installation finishes you may need to restart your computer.
Configure your wireless connection (see below).
Configure Windows XP's wireless client
NOTE: These steps show how to use the SecureW2 client with the default Windows XP wireless services. If you are using another Wireless control utility please consult your documentation as these steps may 'break' connections you have set up through that utility.
- Open the Network Connections window: Start > Control Panel > Network & Internet Connections > Network Connections
- Right-click on your Wireless Network Connection and select Properties.
- Select the Wireless Networks tab.
- Put a check in "Use Windows to configure my wireless network settings"
- Click Add.
- A "Wireless network properties" window will appear.
- Enter the following information on the Association tab:
- Network name (SSID): k-state.wpa2
- Network Authentication: WPA2
- Data encryption: AES
- Click on the Authentication tab and select EAP type: SecureW2 EAP-TTLS.
- Click on the Properties button.
- In the SecureW2 client window select "k-state.wpa" in the "Profile:" drop-down box.
Secure W2 Profile Settings
Note: K-State Salina Secure W2 installer will automatically configure a profile for the WPA network. You should not need to manually configure these settings - they are only listed below for your reference.